SMD AMM-1 Steve Meade Designs Impedance / Dyno / Wattage Audio Multimeter New

<p>SMD AMM-1 Steve Meade Designs Impedance / Dyno / Wattage Audio Multimeter</p> <p>This listing includes:</p> <ul> <li>(1) AMM-1 tool</li> <li>(1) Protective silicon rubber boot</li> <li>(1) Harness</li> </ul> <p>The Audio Multimeter and Handheld Dyno Measure true amplifier power! Measure impedance of speaker boxes. Measure voltage drops, and much more!</p> <h3>Features:</h3> <ul> <li>Measure True Amplifier Power output into any load reactive or resistive</li> <li>Measure Common DC voltages</li> <li>Measure DC voltage drops during quick transients on cable runs or battery/charging systems</li> <li>Measure Impedance of speakers at any power or frequency from 20Hz - 1kHz (box rise)</li> <li>Measure Phase Difference between Voltage and Current into reactive loads (Power Factor)</li> <li>Find Tuning Frequency of subwoofer enclosures</li> <li>Tune subwoofer enclosures for maximum power transfer</li> <li>Measure AC Volts (amplifier output)</li> <li>Measure AC Amps (amplifier output)</li> <li>Measure apparent power (VA)</li> <li>Measure Frequency of an Sound Wave</li> </ul> <h3>Specifications:</h3> <ul> <li>DC Voltmeter:-100 Volts to +100 Volts</li> <li>AC Voltmeter: 0 - 150 VRMS</li> <li>AC Ammeter: 0 - 100 ARMS</li> <li>AC Apparent Power: 0 - 15,000 VA</li> <li>Power Factor: 50 - 100%</li> <li>Frequency: 10 - 20,000 Hz</li> <li>AC Impedance: 0 - 200 Ohms</li> <li>True Power Dyno: 0 - 15,000 Watts</li> <li>Auto-shutoff timer 8 - 10 minutes after ON button is pressed</li> <li>Battery self-test and display of condition when AMM-1 is initialized</li> </ul> <h3>Dimensions:</h3> <ul> <li>Length: 9 inches</li> <li>Width: 6 inches</li> <li>Height: 2 inches</li> </ul>

• Frequency: 10 - 20,000 Hz
• AC Impedance: 0 - 200 Ohms
• True Power Dyno: 0 - 15,000 Watts
• DC Voltmeter:-100 Volts to +100 Volts AC Voltmeter: 0 - 150 VRMS AC Ammeter: 0 - 100 ARMS
• Measure True Amplifier Power output into any load reactive or resistive